XLS+ FMS Issue

Citation XLS+ Extrene G3 Support Forum
Post Reply
jordi1992
Posts: 4
Joined: Tue Nov 19, 2019 10:24 pm

XLS+ FMS Issue

Post by jordi1992 » Fri Nov 22, 2019 5:51 pm

i have purchased today the Citation Xls+ i get message in the fmc that the key is not active how can i resolve this ?
Last edited by jordi1992 on Sun Nov 24, 2019 11:56 am, edited 2 times in total.

WarpD
Posts: 342
Joined: Mon Sep 11, 2017 6:26 pm

Re: fms

Post by WarpD » Fri Nov 22, 2019 8:00 pm

You didn't provide any information regarding what you were doing at the time, fortunately I know exactly when and why that message shows up.

1 - If you attempt to enable VNAV Advisory on the PERF menu page on the non-coupled side and with no target altitude selected, you will see this message.
2 - If you attempt to send the V speeds to the PFD and the takeoff performance is not calculated (this requires all takeoff values be entered) OR your aircraft is no longer on the ground then you will see this message.

So, you have done either #1 or #2.
Best Regards,
Ed Wilson [WarpD]

Image

jordi1992
Posts: 4
Joined: Tue Nov 19, 2019 10:24 pm

Re: XLS+ FMS Issue

Post by jordi1992 » Sun Nov 24, 2019 11:57 am

yes indeed the first one i tried the vnav advisory and setup the vnav indeed i suppose aim doing something wrong

jordi1992
Posts: 4
Joined: Tue Nov 19, 2019 10:24 pm

Re: XLS+ FMS Issue

Post by jordi1992 » Thu Nov 28, 2019 9:24 am

i have read the manual about vnav its only not working when aim programming the fms all the legs of the flight plan stays empty
and i have filled in all the pages included the perfomance page i have aswell the citation x there is vnav working fine with all the altittude en speed restrictions aswell here is the flight plan AND1SY ANDIK UN873 GRONY UM105 EEL UN125 WSN UZ612 GESTO Z870 BKD L619 VIBIS VIBI1R

User avatar
N400QW
Site Admin
Posts: 519
Joined: Tue Sep 05, 2017 12:02 am
Location: Midwest
Contact:

Re: XLS+ FMS Issue

Post by N400QW » Thu Nov 28, 2019 10:35 am

Other AC including our own are not relevant to your issue. This AC requires certain things as outlined by Ed, be sure you are following his instructions and the included documentation.
Best Regards,
Ronald Hamilton ASEL

Image

WarpD
Posts: 342
Joined: Mon Sep 11, 2017 6:26 pm

Re: XLS+ FMS Issue

Post by WarpD » Thu Nov 28, 2019 2:43 pm

jordi1992 wrote:
Thu Nov 28, 2019 9:24 am
i have read the manual about vnav its only not working when aim programming the fms all the legs of the flight plan stays empty
and i have filled in all the pages included the perfomance page i have aswell the citation x there is vnav working fine with all the altittude en speed restrictions aswell here is the flight plan AND1SY ANDIK UN873 GRONY UM105 EEL UN125 WSN UZ612 GESTO Z870 BKD L619 VIBIS VIBI1R
This avionics does not create altitude entries for each leg. It is not that type of system. As stated, you can not compare with other aircraft. Even another aircraft with the Pro Line 21 will be unlikely to be exactly like this one. Each airframe has it's own unique version of the Pro Line 21.
Best Regards,
Ed Wilson [WarpD]

Image

jordi1992
Posts: 4
Joined: Tue Nov 19, 2019 10:24 pm

Re: XLS+ FMS Issue

Post by jordi1992 » Tue Dec 03, 2019 6:24 pm

oh okey thanks for the information and for your help i am gonna read the manual to understand it better

Post Reply