CXG2 T/O Flaps

Citation X Extreme G2 Support Forum
Post Reply
User avatar
N400QW
Site Admin
Posts: 380
Joined: Tue Sep 05, 2017 12:02 am
Location: Midwest
Contact:

CXG2 T/O Flaps

Post by N400QW » Tue Sep 11, 2018 8:14 pm

Edka118 wrote:
Tue Sep 11, 2018 4:54 pm
Hi,
I'm having the following issue. on the MFD in the lower left hand part of the display there's a semi circle with an arrow. This is supposed to show the correct AOA for TO within a green band. I can't seem to move the arrow at all, even when flaps are set correctly an TO speeds are set using the pitch wheel. Some assistance would be appreciated.


Thanks,
Ed
Best Regards,
Ronald Hamilton ASEL

Image

WarpD
Posts: 222
Joined: Mon Sep 11, 2017 6:26 pm
Contact:

Re: CXG2 T/O Flaps

Post by WarpD » Wed Sep 12, 2018 5:17 pm

I answered that in the original post.
Best Regards,
Ed Wilson [WarpD]

Image

User avatar
N400QW
Site Admin
Posts: 380
Joined: Tue Sep 05, 2017 12:02 am
Location: Midwest
Contact:

Re: CXG2 T/O Flaps

Post by N400QW » Wed Sep 12, 2018 8:39 pm

WarpD wrote:
Wed Sep 12, 2018 5:16 pm
Edka118 wrote:
Tue Sep 11, 2018 4:54 pm
Hi,
I'm having the following issue. on the MFD in the lower left hand part of the display there's a semi circle with an arrow. This is supposed to show the correct AOA for TO within a green band. I can't seem to move the arrow at all, even when flaps are set correctly an TO speeds are set using the pitch wheel. Some assistance would be appreciated.


Thanks,
Ed
Uh... nope... that's not correct. :) There is no such thing as "correct AOA for TO" and, in fact, that is the elevator trim indicator. The green band is where you are supposed to adjust your elevator trim for takeoff.

I strongly urge you to read the documentation and get to know what all of the areas on the PFD and MFD actually are.
Best Regards,
Ronald Hamilton ASEL

Image

Edka118
Posts: 2
Joined: Sun Sep 09, 2018 2:36 pm
Contact:

Re: CXG2 T/O Flaps

Post by Edka118 » Thu Sep 13, 2018 4:52 pm

Thanks, that's what I get for not reading the manual :!:

Ed

User avatar
N400QW
Site Admin
Posts: 380
Joined: Tue Sep 05, 2017 12:02 am
Location: Midwest
Contact:

Re: CXG2 T/O Flaps

Post by N400QW » Thu Sep 13, 2018 8:12 pm

Ed, as I recall there is a pic in the docs regarding TO flaps settings. ;)
Best Regards,
Ronald Hamilton ASEL

Image

Edka118
Posts: 2
Joined: Sun Sep 09, 2018 2:36 pm
Contact:

Re: CXG2 T/O Flaps

Post by Edka118 » Fri Sep 14, 2018 3:17 pm

I'll look it up

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest