Sorry I just noticed I posted in the incorrect forum. Should I move this to the CJ1+ forum?
After flying the Citation X for a couple of years I thought I'd like to try another Business Jet so I purchased the CJ1+. I am please with it but have some questions:
1. Is there a tutorial describing how to use the A/P?
I am having problems with FLC oscillating between dive and climb. I engaged FLC when at 210 kts in a climb with the speed set for 210.
On an ILS APP mode descends when the G/S is 3 dots high. I was level at 5000 with ALT engaged. I hit the APP button. It captured the LOC and turned onto the inbound track. As soon as it was on the inbound track the airplane started a slow descent with the Green G/S dot still 3 bars above center.
2. Is there a TO/GA button?
3. When loading the airplane I connect the GPU and then shut down the engines using the click spot below the throttles (save fuel ). When I am ready to start the engines I hit Engine start for the right engine. I then use the same click spot to move the throttle to idle. But the engine does not start. It runs up to a bit above 20% N2 and then it stops trying to start the engine. I discovered that I need to use the FSX CTRL-Shift-F4 key combination to move the mixture out of cutoff. Isn't that what the clock spot should have done?
FSX Gold on Windows 7
I downloaded the CJ1+ installer a week ago so expect I have the latest version.
Generation Two Corporate Aviation Aircraft FSX Gold/FSX Steam/P3DV3
1 post • Page 1 of 1